中文
- 中文
- English
- français
- Deutsch
- русский
- italiano
- español
- português
- 日本語
- 한국의

双 2x2 Bypass 机械式光开关

Unmatched Low Cost, Dual 2x2 Bypass Mechanical Optical Switch
Low Optical Distortions
High Isolation
High Reliability
Epoxy-Free Optical Path

现在查询下载

类别

热门产品

产品详细信息

Dual 2x2 Bypass Mechanical Optical Switch

The Dual 2x2 Bypass Mechanical Fiber Optical switch connects optical channels by directing or blocking an incoming optical signal into the output fiber. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. A latching version preserves the selected optical path after the drive signal has been removed, while the non-latching versions default to either the open or closed state when power is removed. The Mechanical Fiber Optical Switch has integrated electrical position sensors. The new material based advanced design significantly reduces moving part position sensitivity, offering unprecedented high stability as well as unmatched low cost

Specifications

Operating Wavelength	1260~1620nm(SM) 850nm(MM)	Insertion Loss	≤1.0dB
Wavelength Dependent Loss	≤0.25dB	Polarization Dependent Loss	≤0.05dB
Temperature Dependent Loss	≤0.20dB	Return Loss	SM≥50dB MM≥30dB
Cross Talk	SM≥55dB MM≥35dB	Switch Time	≤8ms
Repeatability	≤±0.02dB	Durability	≥10⁷ times
Operating Voltage	3 or 5V	Switch Type	Non-Latching/Latching
Operating Temperature	－20~＋70℃	Storage Temperature	－40~＋85℃
Optical Power	≤500mW	Dimension	27.0L×12.0W×8.2H mm

Pin Configurations

Type	Optical Route	Electric Drive				State Sensor
D2×2B	Optical Route	Pin 1	Pin5	Pin6	Pin10	Pin 2-3	Pin3-4	Pin7-8	Pin 8-9
Latching	P1-P1’、P2-P2’ P3-P3’、P4-P4’	V＋	GND	--	--	Open	Close	Close	Open
Latching	P1-P3’、P2-P4’	--	--	GND	V＋	Close	Open	Open	Close
Non-latching	P1-P1’、P2-P2’ P3-P3’、P4-P4’	V＋	--	--	GND	Open	Close	Close	Open
Non-latching	P1-P3’、P2-P4’	--	--	--	--	Close	Open	Open	Close